This is a simple smokey combination.
On the inner side I used a silvery colour and on the outer side I used a shimmery dark grey colour.
I mimiced the same with the eyeliner by using silver on the inner half and a black on the outer half.
For this design, I firstly started by painting all nails except the ring finger in 2 coats of a pastel shimmery pink shade. On the ring fingers I painted 2 coats of a nude shade.
On the pink nails I used a very small dotting tool and a dark pink shade and used this 2 make 2 small triangles on each nail. Afterwards I took a medium sized dotting tool and a lighter shade of pink to place a dot in between the 2 triangles. This formed a bow shape on each nail.
I found the shades of pink that I used for these bows were too similar and so it just kind of merged together. I think it would have looked a lot better if I had used a gold colour to place the dot for the centre of the bows.
On the ring fingers I added some rhinestones to make a large bow shape over the whole nail. I started by placing a light pink rhinestone in the very centre of the nail.
Next I took a darker colour pink rhinestone and placed 2 on either side of the one I had just placed. Next to each of these rows I added a row of 3 rhinestones in the same colour. This created a bow shape. If your nail is wide enough, then continue to add rows of rhinestones to either side, increasing the amount by 1 each time.
I’ve had all these photos of different eye shadow colour combinations sitting around on my desktop for a while now and as I managed to find a bit of extra spare time recently, I felt it was about time I got around to posting them.
All colours used came form my 120 palette. Applying makeup has never been one of my strong points, but I love colour. So naturally I like to mess around with putting different colours together.
I used an orange colour on the bottom half of my eyelid, and then blended it with a green colour above it.
I used a similar green colour eye liner on my eyelid, and then a gold across my lower lash line.
I’ve been seeing a lot of cute biscuit ideas around the internet lately, and as biscuits are so easy to make I was really in the mood for some kitchen experimentation.
1. Start by weighing out your sugar and adding it to a bowl.
2. Then weigh out your butter. Cut it into cubes and add to the bowl.
3. Add your vanilla essence and cream the butter and sugar together fully with a fork.
4. Weigh out the flour and sieve it into the bowl.
5. Add a pinch of salt and fold everything together into a dough using your hands.
6. Split your mixture into equal sized balls, one for each of the colours you want to use. In my case I split it into 4.
7. Manipulate each dough ball until the colouring is fully incorporated. Add more colouring if required and repeat.
8. Put the dough balls into the fridge to chill for 30 mins.
9. Dust your work surface with flour and remove one of the dough balls from the fridge.
10. Start to preheat your oven on gas mark 5 and grease a baking tray with butter.
11. Roll out the dough to just under 1cm thick and use a large round cutter to cut out circle shapes.
12. Remove the excess dough and put it to one side to reuse later.
13. I found it was best to keep the cutter around each circle while making the button design as this stops it from spreading out too much. To make the round circle impression in the button, I used an upside down shot glass that was just smaller than the size of my biscuit cutter. Make sure that you do not press down too far as we do not want to cut anything out. For an alternative button design, I pressed the lid of a lip balm tub into the middle of the button in order to make the edges of the buttons look thicker.
14. In order to add the holes to each button, I simply used a straw, and then blew through it to remove the dough from the straw.
15. When my biscuits were designed, I carefully moved them over to the baking tray, making sure that there was room for any expansion in between.
16. I placed them in the over near the higher side of the middle of the oven for 10 mins.
17. After I turned the tray around and left them for a further 5 mins.
18. Once cooked, I removed them from the oven and carefully removed them from the tray onto a wire rack in order to cool. Don’t worry if they seem a bit soft as they will harden as they cool.
19. Repeat steps 11 – 18 in order to use up the remaining of the dough ball.
20. Then repeat step 19 for the other colours of biscuit dough balls that you have left in the fridge.
Don’t worry too much if some of your biscuits loose their shape too much while baking. Those ones are meant for your own personal taste testing before you have to share the rest.
I really love how this design came out, but then it does use my favourite colour.
I started by painting all of my nails except the ring fingers in 2 coats of a shimmery white shade.
On the ring fingers I used a purple textured fine glitter type nail paint. In order to keep durability and the matte textured finish with such nail polishes, I usually put one coat of the polish, then my top coat, and then the 2nd coat on the top of this.
I then took rhinestones in silver, light purple and dark purple. I started by placing 2 silver rhinestones next to each other in a line starting from the base end of each nail that was painted in white.
I then continued the lines by placing 2 light purple, and then lastly 2 dark purple rhinestones. This created a line going down the middle of each nail in a ombre rhinestone type effect.
I did quite a few bits of DIY crafts for my wedding last year. One of which were these foam rose hair clips. I wanted to share with you all how I made them as it was actually quite simple.
I purchased some foam roses online that I liked. They came with metal stems which I was able to remove by carefully pulling them out. These particular roses had a piece of green paper on the underneath to look like leaves. I used this to help hold the clips in place. I then took a plain alligator clip and carefully pushed it between the paper and foam rose to make a space for it to fit properly. I then removed it, being careful not to rip the paper too much. Using a hot glue gun, I covered the top fork of the clip with glue and then quickly pushed it back between the paper and rose before the glue dried. If you feel it does not secure it well enough you can put some additional glue where needed, but be careful to not overdo it.
I also added a single rhinestone to the top center of each flower. I carefully used tiny amounts of glue in order to glue the petals in the center down more flat. This was to make everything look a lot better once the rhinestone had been placed down as I wanted it to be flat on the side of a petal. I again used hot glue to stick this in place.
I also made a clip made up of 2 flowers with loops of white organza ribbon in the center. To make this one, I started by making a small loop in the ribbon that the top fork of the alligator clip could fit through. I sewed this together and then sewed several bigger loops going from side to side like a few infinity symbols on top of each other. I then sewed one foam flower to the top and one to the bottom of the ribbon loops. I used the hot glue gun to secure the ribbon loop to the alligator clip. I also added rhinestones to each flower in the same way as I did for the other clips.